The Synergy 240 shares the same design as the Synergy 450 and Synergy 300, but is designed for easier to drive speakers. You don’t lose any of the magical and open sound of the bigger Synergy amplifiers. The sound stage is there, the dynamics are there, and the purity is there. The only thing missing is the high power and higher price.
The standard chassis is 17" wide, 13" deep, 7" high. We also offer a thick double anodized silver faceplate with a push button power switch and modern LED power lamp at additional cost. Shipping weight 32 pounds.
The Synergy 240 has a custom made oversized high capacity shielded toroid power transformer feeding 8 active and independent regulated supplies to provide incredible dynamic range, bass extension, transient detail, and air. All of the power supply parts are selected for long life, reliability and operate well within their technical specification ratings.
A unique engineering feature is that all Synergy power amplifiers have regulated power supplies for the output transistors which provide unequaled bass control and micro dynamics.
The Synergy 240 operates with standard 120 Volt power, has an IEC power jack, and includes a polarized 120V power cord. For international use a 240 Volt (50-60 Hz.) option is available at additional cost.
Synergy amplifiers are Class A/B, and are biased as Class A at normal listening levels. The Synergy series of amplifiers have no overall feedback, so that feedback cannot overload the input circuits. Feedback exists only as a unique active buffered powered loop matched to the active buffered input parameters.
Synergy amplifiers are uniquely DC stable. They are so stable that there is no need for the typical DC balance adjustments. This means Synergy amplifiers will not generate speaker damaging DC drift even when driven past clipping.
The combination of our design ideas allow the amplifiers to run cooler, last longer, and be amazingly fault tolerant.
The Synergy 240 has half the current capacity of the Synergy 300, but still produces 120 watts per channel, 20 to 20 kHz into 8 ohms at less than 0.01% THD. Four mos-fet output transistors, standard on the Synergy 240; can drive 4 Ohm and up speakers. The Synergy 240 is an excellent amplifier paired with medium to efficient loudspeakers.
The Synergy produces 120 watts per channel, 20 to 20 kHz into 8 ohms at less than 0.01% THD. Four mos-fet output transistors to handle most standard speakers (4 Ohm loads and up).